Quick Answer: Which Of The Following Is An Example Of A Struck By Hazard?

What are the 4 hazards?

There are four types of hazards that you need to consider:Microbiological hazards.

Microbiological hazards include bacteria, yeasts, moulds and viruses.Chemical hazards.

Physical hazards.


What are the four common types of struck by hazards?

There are four common struck-by hazards in construction: struck-by flying objects, struck-by falling objects, struck-by swinging objects and struck-by rolling objects.

What is a caught in Hazard?

According to OSHA, caught-in or – between hazards are defined as: Injuries resulting from a person being squeezed, caught, crushed, pinched, or compressed between two or more objects, or between parts of an object.

Which of the following will help avoid a struck by incident?

Some additional useful tips to help avoid struck-by accidents include:Workers should always wear proper PPE such as hard hats, safety glasses, goggles and face shields to help protect from workers from falling objects.Strive to maintain a safe distance outside of the swing radius for cranes and backhoes.More items…•

Which of these injuries could be caused by a flying object?

Flying objects can cause injuries such as cuts, abrasions, concussions, or blindness. Flying objects are a major concern when workers are working with power tools, pushing/pulling loads, or under scaffolds, or work is being performed overhead.

Which of the Focus Four is responsible for the most fatalities?

The leading causes of worker deaths on construction sites are referred to as OSHA’s Focus Four. They are falls, electrocution, struck-by object, and caught-in/between. These Fatal Four hazards were responsible for nearly three out of five (56 percent) construction worker deaths in 2010, BLS reports.

Which of the following are examples of caught in or hazards?

Types of Caught-in or -between Hazards machinery which has unguarded moving parts or is not locked out during maintenance; unprotected excavations and trenches; heavy equipment that tips over, collapsing walls during demolition; and. working between moving materials and immovable structures, vehicles, or equipment.

What type of injuries can occur in a struck by incident?

Struck by hazards are categorized by: flying object, falling object, swinging object or rolling object. Caught in or between hazards are categorized by: cave-ins, being pulled into or caught in machinery and equipment or being compressed or crushed between rolling, sliding or shifting objects.

What are the major types of caught in and caught between hazards in construction?

Avoiding OSHA’s Fatal Four – Caught-In/Between HazardsCaught-in/Between Hazards. Caught-in or caught-between accidents occur when someone is caught, crushed, squeezed, compressed or pinched between two or more objects. … Power Tools & Machinery Accidents. … Heavy Equipment Accidents. … Trenching Accidents.

What are some of the hazards associated with trenches?

Dangers of Trenching and Excavation Other potential hazards include falls, falling loads, hazardous atmospheres, and incidents involving mobile equipment. Trench collapses cause dozens of fatalities and hundreds of injuries each year.

Who is capable of identifying existing and predictable hazards?

An OSHA “competent person” is defined as “one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them” [29 CFR 1926.32(f)].

Which one is an example of a struck by flying hazard?

Struck-by flying object Major Hazards: Flying object hazard exists when something has been thrown, hurled, or is being propelled across space. It can include instances when a piece of material separates from a tool, machine or other equipment, striking a worker, resulting in injuries or fatality.